Sayfa adı gelebilir
TEKLİF FORMU

BanTape® 3025 CW/R

ÜRÜN BİLGİSİ

BanTape® 3025 CW/R

 

FEATURES

  • Aluminium backing provides excellent reflection of both heat and light
  • Cold weather adhesive with moderate adhesion offers good sealing and bonding on
  • Foil-scrim-kraft facing joints and seams in HVAC ductwork application
  • Good aging resistance both indoors and outdoors
  • Low moisture vapour transmission rate offers excellent sealing and patching performance
  • IMO Resolution MSC 61(67) Annex I Part 5 and Annex 2 IMO Resolution MSC 61(67) Annex 1 Part 2 and Annex 2 UL 723 Listed (Flame/Smoke Rating)

 

DESCRIPTION

BanTape® 3025 CW/R nominal 30 micron (1.2 mil) high tensile strength aluminium foil backing, combined with a cold weather flame retardant acrylic adhesive, protected by an easy-release silicone release paper. The workable foil applies easily to both fibrious and sheet metal ducts and conforms to irregular surfaces.

BanTape® 3025 CW/R excels in demanding temperature and humidity applications and provides superior performance and durability over a wide range of environmental conditions.

 

PRODUCT USE

HVAC industry for joining and sealing Foil-Scrim-Kraft facing laminated fiberglass blanket/duct board joints and seams, joining and sealing flexible air duct seams and connections. General purpose holding, patching, sealing and masking applications - indoors and outdoors.

 

PRODUCT FORM & SIZE AVAILABLE

Cut Roll: 75mm(3") / 100mm(4")

Log Roll: 1200mm x 45mm/50m

Jumbo Roll: 1200mm x 1000mm/1200mm/1350mm

 

Important Note

1. The data above are typical values only and should not be used for specification purpose.

2. Tolerance: Weight and thickness: ±10%; Width: ±3mm; Length: Cut Roll ±0.3m; Jumbo Roll ±0.5%

 

UYGULAMA VIDEOLARI

TEKLİF FORMU

Lütfen, tüm alanları doldurun.
Güvenlik kodu eşleşmiyor !
Lütfen geçerli bir telefon girin.